物品名称 规格型号 数量 单位 描述
| 2P不锈钢球阀 | 详见规格 | 10.00 | 个 | {"规格型号":"DN25","序列号":"无","公称压力":"1.6MPa","公称通径":"DN25mm","连接方式":"丝口管螺纹连接","驱动方式":"手动","适用电压":"无","气源压力/液体压力":"1.0MPa","反馈信号":"无","是否配带执行机构":"否","执行机构型号":"无","执行机构与阀门连接尺寸":"无","工作温度":"0~80℃","输送介质":"水","主体材质":"304不锈钢","国产/进口":"国产","生产厂家":"国产","特殊要求":"无","使用寿命":"≥365天","参照标准":"GB/T 12237-2021","备注":"验收标准：到货与技术要求不符时，供应商无条件退换货处理。"} |
| 丝口不锈钢球阀 | 详见规格 | 10.00 | 个 | {"规格型号":"DN15/2P","序列号":"无","公称压力":"1.6MPa","公称通径":"15mm","连接方式":"丝口连接","驱动方式":"手动","适用电压":"无","气源压力/液体压力":"无","反馈信号":"无","是否配带执行机构":"否","执行机构型号":"无","执行机构与阀门连接尺寸":"无","工作温度":"≤220℃","输送介质":"高温蒸汽、水、气","主体材质":"304不锈钢","国产/进口":"国产","生产厂家":"不限","特殊要求":"无","使用寿命":"365天","参照标准":"GB/T 12237-2021","备注":"到货产品必须有产品合格证，必须符合技术要求，达不到技术要求需供货商无条件退换货物。"} |
| 焊接单瓣旋启式止回阀 | 详见规格 | 3.00 | 个 | {"规格型号":"H64Y-200C/DN65","公称压力":"20MPa","公称通径":"65mm","连接方式":"对口焊接","驱动方式":"自动","适用电压":"无","气源压力/液体压力":"无","反馈信号":"无","是否配带执行机构":"否","执行机构型号":"无","执行机构与阀门连接尺寸":"无","工作温度":"0~425℃","输送介质":"高压给水","主体材质":"阀体WCB","国产/进口":"国产","特殊要求":"接管尺寸：Ф76*6mm","使用寿命":"≥730天","参照标准":"DL/T 923-2016","备注":"1、供货要求：（1）产品的包装应保证在运输过程和贮存中不致损坏或遗失；（2）包装箱内应附有产品合格证、装箱清单、性能试验报告单（包括水压试验报告）；（3）包装、贮存和运输过程中，阀瓣(阀板)应处于关闭位置固定不动。两侧通道以盖板或塞子封闭，防止尘垢、污水浸入。2、外观质量：（1）铸件外观质量应符合JB/T 7927的规定；（2）介质通流部位应清理干净，不应有多肉、芯砂、铁包砂、毛刺和氧化皮等缺陷。3、不合格品处理标准：来货如与技术要求不符或存在质量问题，供应商无条件给予免费退、换货处理。"} |
| 手动衬胶对夹蝶阀 | 详见规格 | 4.00 | 个 | {"规格型号":"D71X-10P/DN100","公称压力":"1MPa","公称通径":"100mm","连接方式":"对夹式","密封方式":"橡胶软密封","驱动方式":"手动","适用电压":"无","气源压力/液体压力":"无","反馈信号":"无","是否配带执行机构":"无","执行机构型号":"无","执行机构与阀门连接尺寸":"无","工作温度":"≤80℃","输送介质":"石膏浆液","主体材质":"阀体材质:球墨铸铁","内衬材质":"**乙丙橡胶","国产/进口":"国产","特殊要求":"阀板材质:2507，阀杆材质:45#钢","使用寿命":"≥360天","参照标准":"GB/T 12238-2008","备注":"验收标注:到货需带合格证,外观无缺损,密封严密,阀体表面无锈蚀,开关灵活无卡涩,无明显制造缺陷.不符合要求厂家要无条件给予退货或换货."} |
| 截止阀 | 详见规格 | 4.00 | 个 | {"规格型号":"J61Y-320/DN20","序列号":"无","公称压力":"32MPa","公称通径":"20mm","连接方式":"焊接","驱动方式":"手动","是否配带执行机构":"否","执行机构型号":"无执行机构","执行机构与阀门连接尺寸":"无","工作温度":"≤425℃","输送介质":"水、蒸汽、油","主体材质":"WCB","国产/进口":"国产","生产厂家":"任意阀门生产厂家","特殊要求":"到货后如不符合技术要求,供应商应无条件给予更换、退货","使用寿命":"1460天","参照标准":"GB/T 12233-2006"} |
| 不锈钢截止阀 | 详见规格 | 1.00 | 个 | {"规格型号":"J41W-16R/DN100","序列号":"J41W","公称压力":"1.6MPa","公称通径":"100mm","连接方式":"法兰连接","驱动方式":"手动","是否配带执行机构":"否","执行机构型号":"无","执行机构与阀门连接尺寸":"无","工作温度":"-20~+350℃","输送介质":"水.油.硫酸溶液.弱性液体.污水.蒸汽等介质","主体材质":"316L不锈钢","国产/进口":"国产","生产厂家":"无要求","特殊要求":"来货附带合格证","使用寿命":"＞1095天","参照标准":"CB/T 3942-2002","备注":"1.外观无缺损，密封严密，阀体表面无锈蚀，开关灵活无卡涩，无明显制造缺陷。\n2.阀杆经调质及表面氮化处理，有良好的抗腐蚀性和抗擦伤性。\n3.耐酸耐碱耐油性能强。\n4.当验收不符合技术要求时，需进行退换货处理，期间所产生的运输费用由供货商承担。"} |
| 全衬氟蝶阀 | 详见规格 | 5.00 | 个 | {"规格型号":"D371F46-10C/DN100","公称压力":"1MPa","公称通径":"100mm","连接方式":"对夹式","密封方式":"氟塑料密封","驱动方式":"手动","适用电压":"无","气源压力/液体压力":"无","反馈信号":"无","是否配带执行机构":"无","执行机构型号":"无","执行机构与阀门连接尺寸":"无","工作温度":"≤150℃","输送介质":"海水","主体材质":"碳钢","内衬材质":"F46","国产/进口":"国产","特殊要求":"无","使用寿命":"≥360天","参照标准":"GB/T 12238-2008","备注":"验收标注:到货需带合格证,外观无缺损,密封严密,阀体表面无锈蚀,开关灵活无卡涩,无明显制造缺陷.不符合要求厂家要无条件给予退货或换货."} |
| 手动衬胶法兰蝶阀 | 详见规格 | 30.00 | 个 | {"规格型号":"D41XP-16Q/DN50","公称压力":"1.6MPa","公称通径":"DN50mm","连接方式":"法兰","密封方式":"双向弹性密封蝶阀","驱动方式":"手动","适用电压":"无","气源压力/液体压力":"无","反馈信号":"无","是否配带执行机构":"无","执行机构型号":"无","执行机构与阀门连接尺寸":"无","工作温度":"≤80℃","输送介质":"脱硫石膏浆液","主体材质":"阀体材质:球墨铸铁(QT450)","内衬材质":"**乙丙橡胶","国产/进口":"国产","特殊要求":"阀杆材质:45#钢,阀板材质:2507双相不锈钢","使用寿命":"1年（根据运行工况及开关频率而定）天","参照标准":"GB/T 12238-2008","备注":"验收标注:到货需带合格证,外观无缺损,密封严密,阀体表面无锈蚀,开关灵活无卡涩,无明显制造缺陷.不符合要求厂家要无条件给予退货或换货."} |
| 全衬氟蝶阀 | 详见规格 | 4.00 | 个 | {"规格型号":"D371F46-10C/DN150","公称压力":"1MPa","公称通径":"150mm","连接方式":"对夹式","密封方式":"氟塑料密封","驱动方式":"手动","适用电压":"无","气源压力/液体压力":"无","反馈信号":"无","是否配带执行机构":"无","执行机构型号":"无","执行机构与阀门连接尺寸":"无","工作温度":"≤150℃","输送介质":"强酸、强碱、强氧化性介质","主体材质":"铸铁","内衬材质":"F46","国产/进口":"国产","特殊要求":"阀体形式：垂直式阀体； 传动方式：蜗轮式","使用寿命":"≥1095天","参照标准":"GB/T 12238-2008","备注":"验收标注:到货需带合格证,外观无缺损,密封严密,阀体表面无锈蚀,开关灵活无卡涩,无明显制造缺陷.不符合要求厂家要无条件给予退货或换货."} |
| 气动蝶阀 | 详见规格 | 1.00 | 个 | {"规格型号":"DN200/PN16/Z011-A","公称压力":"1.6MPa","公称通径":"200mm","连接方式":"对夹式","驱动方式":"气动","工作温度":"-10~80℃","主体材质":"铸钢","内衬材质":"氟橡胶","使用寿命":"1825天"} |
| 截止阀 | 详见规格 | 4.00 | 个 | {"规格型号":"J41H-100I/DN40","序列号":"无","公称压力":"10MPa","公称通径":"40mm","连接方式":"法兰连接","驱动方式":"手动","是否配带执行机构":"否","执行机构型号":"无","执行机构与阀门连接尺寸":"无","工作温度":"0~540℃","输送介质":"高温蒸汽等","主体材质":"15CrMo","国产/进口":"国产","生产厂家":"****点击查看总厂****点击查看公司（原生产厂家）","特殊要求":"来货如与技术要求不符，供应商无条件给予免费退换货处理。","使用寿命":"≥730天","参照标准":"GB/T 12235-2007","备注":"1、适用工作压力：0~10MPa；2、供应商提供产品合格证、供货清单。"} |
| 截止阀 | 详见规格 | 2.00 | 个 | {"规格型号":"J61Y-100V/DN25","序列号":"无","公称压力":"10MPa","公称通径":"25mm","连接方式":"焊接","驱动方式":"手动","是否配带执行机构":"否","执行机构型号":"无","执行机构与阀门连接尺寸":"无","工作温度":"0~540℃","输送介质":"水、过热蒸汽等","主体材质":"12Cr1MoV","国产/进口":"国产","生产厂家":"****点击查看总厂****点击查看公司（原生产厂家）","特殊要求":"接管尺寸：Φ32*4mm","使用寿命":"≥730天","参照标准":"DL/T 531-2016","备注":"1、供应商提供产品合格证、性能试验报告单（包括材质分析报告）、供货清单。2、适用工作压力：0~10MPa。3、验收标准：来货如与技术要求不符，供应商无条件免费给予退、换货处理。"} |
| 涡轮蝶阀 | 详见规格 | 2.00 | 个 | {"规格型号":"D371X-16/DN150","公称压力":"1.6MPa","公称通径":"150mm","连接方式":"对夹式","密封方式":"软密封","驱动方式":"手动","适用电压":"无","气源压力/液体压力":"无","反馈信号":"无","是否配带执行机构":"无","执行机构型号":"无","执行机构与阀门连接尺寸":"无","工作温度":"0-80℃","输送介质":"水","主体材质":"铸铁","内衬材质":"丁晴橡胶","国产/进口":"国产","特殊要求":"无","使用寿命":"1095天","参照标准":"GB/T 12238-2008"} |
联系人228个
可引荐人脉871人
历史招中标信息837条
